TecFeed 250i Welding System

Technical Specifications
Amps & duty cycle: 250A @ 60% max
Mac OCV: 110V DC
Welding voltage: 15-44V
Approx welding amps range on 1.0mm solid wire: (CC 100-250 Amps) (CV 40-250 Amps)
Approx welding amps range on CC with 1.2mm solid wire: (CC 150-250 Amps) (CV 100-250 Amps)
Wire speed range: 2-20meters/min
Wire size: 0.8-1.2mm.
Size approx: 210Wx560Lx420H mm
Weight approx: 9.5kg

The TECFEED 250i wire feeder is robustly constructed in a reinforced moulded case to give a fully enclosed wire feed unit which is well sealed against the elements. Rugged construction and excellent portability make these ideal for all site welding applications. This model is fitted with a heavy-duty contactor with a good safety margin to allow welding up to 250A.

  • Connect to virtually any DC welding power source, CC or CV even 24V batteries work well!

  • Multi-process, MIG, MCAW, FCAW with self-shielding or solid wire & gas shielding.

  • Excellent welding performance with flux cored and solid welding wires with unbeatable arc stability.

  • Rugged design to give a long trouble-free life in less than ideal conditions.

  • Rugged all metal 2 roll drive system to guarantee trouble free wire feeding.

  • Very portable design with strong ergonomic carry handle which lays flat when not needed

  • Heavy duty contactor fitted to start & stop & cope with current up to 250A.

  • Torch trigger latching & burn back control standard

  • Standard Euro torch connection

  • Front controls have a sturdy guard either side to give protection from damage

  • Protected to IP23 so is protected against splashing water & can be used outdoors

  • Works from 20-110V DC & factory tested to 150V to guarantee reliability

  • Takes 15KG spools or 5kg spools.


Contact: Motor On Services Ltd, Unit 8, The Alpha Centre,

Armstrong Way, Yate, Bristol BS37 5NG

E-mail: sales@motoronservices.co.uk 

Tel: 01454 323871