TecFeed 250i Welding System
The TECFEED 250i wire feeder is robustly constructed in a reinforced moulded case to give a fully enclosed wire feed unit which is well sealed against the elements.
Rugged construction and excellent portability make these ideal for all site welding applications. This model is fitted with a heavy-duty contactor with a good safety margin to allow welding up to 250A.
TECHNICAL SPECIFICATIONS
Amps & duty cycle 250A @ 60% max
Mac OCV 110V DC
Welding voltage 15-44V
Approx welding amps range on 1.0mm solid wire (CC 100-250 Amps) (CV 40-250 Amps)
Approx welding amps range on CC with 1.2mm solid wire (CC 150-250 Amps) (CV 100-250 Amps)
Wire speed range 2-20meters/min
Wire size 0.8-1.2 mm
Size approx 210Wx560Lx420H mm
Weight approx 9.5kg
Connect to virtually any DC welding power source, CC or
CV even 24V batteries work well!
Multi-process, MIG, MCAW, FCAW with self-shielding or
solid wire & gas shielding.
Excellent welding performance with flux cored and solid
welding wires with unbeatable arc stability.
Rugged design to give a long trouble-free life in less than
ideal conditions.
Rugged all metal 2 roll drive system to guarantee trouble
free wire feeding.
Very portable design with strong ergonomic
carry handle which lays flat when not needed.
Heavy duty contactor fitted to start & stop & cope with
current up to 250A.
Torch trigger latching & burn back control standard.
Standard Euro torch connection.
Front controls have a sturdy guard either side to give
protection from damage.
Protected to IP23 so is protected against splashing water
& can be used outdoors.
Works from 20-110V DC & factory tested to 150V to
guarantee reliability.
Takes 15KG spools or 5kg spools.
